Workshop: 3d Laser Printers and Printing
Dienstag/Tuesday, 25.11.2014, St. Gallen
In collaboration with the ETH Institute of Machine Tools and Manufacturing, and the Institute for Rapid Product Development of Inspire AG
Photonics Day 2014
3d Laser Printers and Printing
Abstract
Switzerland has a leading machine tool industry. In this workshop we will discuss the state of the art and the challenges of 3d laser printing machine tool manufacturers. In addition research will present their results and technology roadmaps
Agenda
09:30 Early bird Labtours (more Labtours till 13:00)
09:30 Welcome Coffee
11:30 Swissphotonics GA (members only)
12:30 Lunch
13:40 Talks
15:00 Preview of the Workshops
15:10 Networking Break
15:40 Talks
16:40 Workshops
17.30 Apéro Riche
Conference language
English
Venue
Inspire - IRPD at EMPA St. Gallen
Lerchenfeldstrasse 5
9014 St. Gallen
Main connections to the Empa location in St. Gallen
Cost
This workshop is free of charge
Contact
Christoph S. Harder
President Swissphotonics
+41 79 219 90 51
Deadline for inscription
14. 11. 2014
Beni Muller, 23. July 2015
Photonics Day 2014
3d Laser Printers and Printing
Abstract
Switzerland has a leading machine tool industry. In this workshop we will discuss the state of the art and the challenges of 3d laser printing machine tool manufacturers. In addition research will present their results and technology roadmaps
Agenda
09:30 Early bird Labtours (more Labtours till 13:00)
09:30 Welcome Coffee
11:30 Swissphotonics GA (members only)
12:30 Lunch
13:40 Talks
15:00 Preview of the Workshops
15:10 Networking Break
15:40 Talks
16:40 Workshops
17.30 Apéro Riche
Conference language
English
Venue
Inspire - IRPD at EMPA St. Gallen
Lerchenfeldstrasse 5
9014 St. Gallen
Main connections to the Empa location in St. Gallen
Cost
This workshop is free of charge
Contact
Christoph S. Harder
President Swissphotonics
+41 79 219 90 51
Deadline for inscription
14. 11. 2014
Beni Muller, 23. July 2015
Registration
 Speakers (PDF) (170 KB)
|
| Program | ||
| Mark Vögtlin; Institute for Rapid Product Development (IRPD), Inspire AG, 9014 St.Gallen | Labtours | |
| Dr. Christoph S. Harder; President Swissphotonics NTN, 8832 Wollerau SZ | Welcome, Moderation | |
| Prof. Dr. Konrad Wegener; ETH IWF, 8092 Zürich | Introduction Photonics in manufacturing & 3D-Printing |
Wegener (2.47 MB) |
| Oliver Müllerschön; Leitung Branchenmanagement Surface Treatment, Trumpf Laser- und Systemtechnik GmbH, D-71254 Ditzingen (Baden-Würtemberg) | Product and Application Solutions for Additive Manufacturing | |
| Dr. Thomas Peters; Oerlikon Metco Management AG, 8401 Winterthur ZH | Lasercladding & Laser-DMD |
Peters (2.79 MB) |
| Niklaus Keel; CEO TB-Safety GmbH, 5070 Frick AG | Design-Prototype-Serie: Development of a breathing unit | |
| Dipl. Masch. Ing. ETH Adriaan B. Spierings; Manager R&D Selective Laser Melting (SLM), Inspire AG, 9014 St.Gallen | Additive manufactruring @ IWF-inspire – Research & Applications |
Spierings (2.52 MB) |
| Prof. Dr. Michael de Wild; Institute for Medical and Analytical Technologies, School of Life Sciences, University of Applied Sciences Northwestern Switzerland, FHNW, 4132 Muttenz BL | 3D manufacturing of implants made of titanium alloy |
deWild (2.39 MB) |
| Dr. Eric Boillat; Laboratory for Production Management and Processes (LGPP), EPFL, 1015 Lausanne VD | From Remy Glardon’s lab |
Boillat (5.72 MB) |
| Prof. Dr. Valerio Romano; Professor for Applied Photonics, Berne University of Applied Sciences BFH-TI, Burgdorf BE | Workshop: 3-d printers and requirements on Laser sources | |
| Dipl. Masch. Ing. ETH Josef Stirnimann; Leiter Mikro-Bearbeitung, Inspire AG, 8092 Zürich | Workshop: Material and scanstrategy requirements for succesful additive manufacturing | |
| Dr. Christoph S. Harder; President Swissphotonics NTN, 8832 Wollerau SZ | Summary of Workshops | |
